The Gold Well was invented to prospect and work deep gravels in creeks, rivers or lakes. It converts water pressure to create a vacuum, which is used to sink a well through overburden down to bedrock where most of the metal content is found. This way it is not necessary to move worthless material to get to the metal or mineral. Depths of 20 feet to 30 feet have been achieved with a 5 horsepower conventional water pump. The Gold Well has no moving parts. It shapes and directs the water to create the vacuum. It is also capable of being used as a conveyer system to move liquids or solids up to one inch with a lift up to 30 feet.

   Again with no moving parts, other than the pump which is using clean water. It is virtually non-clogging but is equipped with a back flush valve to clean out any clog.

   Unlike a dredge the Goldwell will achieve and maintain a vacuum above or below water level, which allows you to move up above water level to core sample a flood zone, sandbars can also be worked in the same manner. This makes it possible to prospect for minerals or metals anywhere you can deliver water pressure. The material brought up in the Gold Well can be delivered via hose to a sluice box or any other type of concentrator. As the material is moved through the Gold Well it is washed by high pressure, which breaks up any mud, compacted materials, or gray clay associated with placer deposits. This will help release any metals contained within.
  
   The Gold Well can eliminate the need for diving equipment, because you can work 30 foot holes, gravels, or overburdens. The use of a well casing is sometimes necessary in loose materials to stop cave-ins of the well. Once you have reached bedrock the casing will seal water out which will dry up the well casing. With a light or metal detector you can directly examine the bedrock. This can be very useful in locating quartz veins. The Gold Well develops ultra high vacuum, twenty-five to twenty-eight inches of mercury, which can lift up to four inches plus material. The Gold Well will adapt to any dredge. Just connect the output of your pump to the input of your Gold Well and output of the Gold Well ( end with valve ) to your sluice box, and your ready to set your first Gold Well.

   Complete operating instructions come with each Gold Well. The Gold Well will enable the user to prospect and recover materials from depths not possible before. If you do not find metal at bedrock then you move on and set another well. We believe you will find the Gold Well is the most versatile device to hit the market in years. It will allow you to prospect deeper and faster than any DREDGE. A specification sheet is included.

Again thank you for your intrest in our Gold Well. You will find the Gold Well will meet and exceed your expectations.